However, for a whiter result, 1 part A with 3 parts B may be used during the course of a second application. bare wood to produce lighter wood tones, and obtain conformity of color. Left untreated, stains may still be present after bleaching.įor purchasing purposes, you should be aware that, typically, parts A and B are used in equal parts. DALYS : Paint and Decorating / Wood Finishes A & B Bleach - Specs A SDS B. Stain removal requires separate treatment with Daly's Booster Stain Remover.
This can happen when trying to match newly installed wood to existing older, finished wood.īleaching does not remove stains. (See accompanying image.) Bleaching is also required whenever the natural color of the wood is too dark for the need at hand. In fact, this acid is often used when preparing to stain old wood flooring. When oxalic acid is applied to an old and gray wood floor, it gives the natural white of the wood flooring. Wood, when exposed to the elements, may turn gray. to lighten wood or match different wood colors. Use on all unfinished woodwork, floors, doors. Wood bleach is excellent for removing black water spots and tannin stains in wood. This is accomplished via chemical breakdown of the oils that produce color.īleaching is usually necessary when a clean, white stained look is desired. Oxalic acid can be used as bleach for both wood and stone. Wood bleach contains oxalic acid which, when mixed with hot water, effectively bleaches unfinished or stripped wood quickly and easily. Re-coating Time: If the wood is very dark or badly stained, repeat application of both solutions after 2 hours.Daly's A & B Wood Bleach is a two-part system used solely for the purpose of lightening the color tone of any species of wood. If the product dries out it can form crystals which can be very difficult to remove so ensure sufficient solution is applied to prevent drying out. The actual bleaching takes place after application of solution B.Ĭoats: one coat of solution A followed by a coat of solution B.Īfter application of solution B leave for a minimum of 2 hours.
Some woods will darken when solution A is applied. and applied in multiple coats, similar to an Ultra® Penetrating Stain, to achieve the desired color. If you routinely refinish old furniture you may already be familiar with using different types of bleach to lighten wood, eliminate stains, and remove old dye in preparation for new coloring and finishing. Bleachtone should be sprayed at approximately 30 p.s.i. For dark wood that needs to be changed to a light natural finish and for making the color of previously stained wood uniform. Bleaching wood is not something you should or will do very often, but there are times when it can be of great benefit. Wipe surface with clean rag and allow to dry.Īpply solution A to clean, dry wood with a brush and leave for 10-20 minutes before applying solution B. Bleachtone can be sprayed directly onto the wood or added (no more than 40) to E-Z Vinyl® Sealer for improved color control. Remove as much of the old finish as possible with a scraper, then damp the surface again with Strypit and rub with the grain with NO 1 or 2 steel wool. Old finishes are best removed with Rustin’s Strypit Paint and Varnish Stripper. All varnish, lacquer or polish must be removed before applying the solutions. Use to bleach natural timber to a lighter shade so it can then be stained to another wood shade, using Rustin’s Wood Dyes. It may be used prior to the application of a variety of other Wood Kote products. Many people use bleach to clean stains, lighten the natural color of the wood. The Lite-N-Up components are mixed prior to application and the degree of bleaching can be controlled by the strength of the Lite-N-Up solution and the number of applications. If you have wood that needs to be cleaned, you can put bleach on wood. Makes bare wood white or lighter in colour. component liquid wood bleach system that will remove the natural color from bare wood. Then following up with a new sponge and applying. This is because the chlorine in bleach can’t penetrate wood, so only the water portion of the bleach gets absorbed. It is formulated to remove the natural colour from bare wood, lighten the colour of stained. While bleach is very effective for killing mold on non-porous surfaces, it doesn’t work well when it comes to wood. Circa 1850 Wood Bleach is a powerful two-component bleach for wood. The Rustins Wood Bleach Set removes weather stains and discolourations. The process is simple, applying Solution A with a sponge to the wood and letting it sit for 5-10 minutes. Note that bleach should not be used to kill mold found on wood.
0 kommentar(er)
